Sukup Steel Industrial Buildings

Sukup Steel Industrial Buildings are built to have an open floor plan that gives your operation adaptability and functionality.  Clear open areas and sturdy construction give a secure location for your operations and products.

Need room to fold out your planter to check the row units? Want to add an office? Or a bay for your combine? You can have it with a Sukup Building built by Miller Welding.

Framework

  • Sukup’s sturdy, rigid frame structure allows plenty of open area to house your machinery.
  • I-Beam structural steel used in corners and end wall columns for additional strength.
  • Clear span up to 200′ for large open areas.
  • Multi-span construction available to reduce cost.
  • Structural framing available in either red or gray oxide primer.
  • Pre-punched purlins and girts ensure a proper fit.
  • Pre-punching also speeds installation for lower construction costs.
  • Purlins and girts are galvanized for long life.
  • Framed openings for standard and oversized doors.

Wall Panels

  • Sukup wall and roof panels are made from Galvalume+ AZ-55 substrate for extreme corrosion resistance.
  • Twelve exterior and trim colors to choose from.

Exterior Wall Panels

  • 26 gauge
  • 36” coverage
  • 1-1/4” rib height
  • 12” on center
  • 50 grade

Interior Liner Panels

  • 29 gauge
  • 36” coverage
  • ¾” rib height
  • 6” on center
  • 50 grade Galvalume+ pre-painted Polar White (only).

Roof Panels

Standing Seam Roof

  • The seams on Sukup standing seam roofs are mechanically-rolled in the field to create a 360o Pittsburgh double-lock seam.
  • Creates a tight, durable, virtually leak-proof seal.
  • Available in Galvalume+ and Polar White.
  • Movable roof clips allow the roof sheets to expand and contract with temperature changes.
  • Allowing for expansion and contraction prevents stress on the roof components that could make the roof more prone to leaks and wind damage.

Screw-Down Roof

  • This style of roof is economical and simple to install.
  • 26 gauge
  • 36″ coverage
  • 1-1/2″ rib height
  • 12″ on center
  • 50 grade

Available in Galvalume+ and all standard Sukup colors.

  • Wide selection of steel-framed, easy-to-install doors and windows.
  • Wainscot wall panels to accent the outside of your building.
  • Interior partition walls to section off your building.
  • Commercial grade fiberglass insulation systems (up to R-45 in the roof!)
  • Eave and gable extensions and canopies
  • Gutters and downspouts
  • Complete trim packages in all of Sukup’s standard colors.